Headphone Amplifiers

• Mastering Quality Sound Reproduction
• Dual 1/4" and 1/8" Headphone Jacks
• Each Pair of Jacks Separately Amplified
• Mono Monitor Analysis: Left-Plus-Right

• Distribute Signal to 16 Headphones
• Two Stereo Main Inputs via 1/4" Jacks
• Two Stereo Main Outputs via 1/4" Jacks
• Two 1/4" Headphone Outputs per Channel

Preamp / Monitor Controller

• Switchable level adjustment: Consumer to pro level 1: 1, +6 dB, +12 dB
• Line signal pre-amplification and headphone signal amplification for three sources
• Loudspeaker playback simulation on headphones

• 450 mW at 16Ω Power Output
• Fully Discrete Bass Boost Circuit
• Approximately 16 Hour Run Time
• 1400 mAh Rechargeable Battery

• Docks with X1, X3II, X5II, & X7 Players
• Expansion for Charging and Amplification
• Three Gain Settings
• Front-Panel 1/4" Headphone Output

• Balanced XLR Line-Level Inputs
• 1/4" and 1/8" Stereo Inputs
• Stereo or Mono Monitoring
• Peak LED Indicators

Preamp / Monitor Controller

• Switchable level adjustment: Consumer to pro level 1: 1, +6 dB, +12 dB
• Line signal pre-amplification and headphone signal amplification for three sources
• Loudspeaker playback simulation on headphones

High-end headphone amplifier

• Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece
• Three switchable inputs (XLR, RCA, mini-jack)
• Solid steel housing

Headphone amplifier

• 2x Stereo jack outputs 6.35 mm, in parallel mode
• Frequency range: 10 - 100,000 Hz (-1dB)
• Total harmonic distortion (THD): 0.01 % at 170 mW / 250 Ohm

• For Computers, iOS Devices & More
• Separate DAC & Amp Functions
• Hi-Res Certified
• Up to 384 kHz / 32-Bit Support

• 6 x Stereo Output Channels
• 2 x Headphone Outputs per Channel
• 2 x Stereo Input Channels
• Selectable Source Input

Headphone amplifier

• Compact studio headphone amplifier with high transmission quality
• Two channels for 2 headphone pairs
• Balanced XLR inputs

Compact headphone amplifier / DAC / preamp with USB port

• Up to 192 kHz (96 kHz optical S / PDIF)
• 7 Segment LED display
• Volume control

• 1RU Size
• Balance and Mix Controls
• Stereo XLR and 1/4" TRS Connections
• LED Level Metering

Professional Headphone Amplifier

• With balanced headphone outputs
• Balanced and unbalanced inputs / outputs with XLR and RCA (gold-plated contacts)
• Line outputs configurable fixed / variable: pre / post fader

Stereo Headphone Amplifier

• NF Frequency range: 5 - 60,000 Hz (-0.5 dB)
• Alps RK 27 pontentiometer with high channel balance and low crosstalk
• Unbalanced inputs via RCA, gold plated

• High-Quality ESS SABRE32 DAC
• 32-Bit/384 kHz Sampling Rate
• Supports DSD256 files up to 12.3 MHz
• Optical, Coaxial, and USB Digital Inputs

• Bluetooth Receiver & DAC for Audiophiles
• Supports Bluetooth aptX and SBC
• Supports 384 kHz / 32-Bit Audio
• iOS & Android Compatible

• For Use On Stage
• Balanced Mono or Unbalanced Stereo Input
• Neutrik Combo XLR / 1/4" Jack
• Aluminum Housing

• XLR, 1/4", RCA, & 1/8" Inputs
• High-Precision Amplifier Volume Control
• 1/4" Stereo Headphone Output
• Drives Up to 600 Ohms Headphones

• 4-Channel Stereo Headphone Amplifier
• 4 Stereo 1/4" Headphone Outputs
• 4 Discrete Stereo Amplifiers
• 564mW Per Channel

• Converts to Balanced Stereo Out
• Dual XLR Outputs
• Volume Control per Channel
• Ground Lift Switch