Loocam LNA-SPG1008 8-Port Gigabit PoE Switch

Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 1
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 2
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 3
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 4
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 5
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 6
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 7
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 8
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch — image 9
80%
20%
94%
Ease of Setup
76%
PoE Power Delivery
83%
Build Quality
88%
Compatibility
71%
Extended Transmission Range
97%
Noise Level
67%
Long-Term Reliability
91%
Value for Money
82%
Port Count & Layout
78%
Surge & Fault Protection
63%
Packaging & Documentation
69%
Thermal Management
86%
Physical Footprint
More

Overview

The Loocam LNA-SPG1008 8-Port Gigabit PoE Switch is a straightforward, no-nonsense option for anyone who needs to power and connect multiple PoE devices without spending a fortune or wrestling with configuration software. It packs 8 PoE+ ports and 2 dedicated gigabit uplink ports into a compact metal chassis that takes up minimal rack or shelf space. There is no management interface, no app to install — you plug it in and it works. The 96W total power budget is worth understanding upfront: spread across all eight ports, you average around 12W each, which suits cameras and access points just fine but won't cut it for power-hungry hardware. This is a workhorse built for practical installs, not enterprise deployments.

Features & Benefits

The extended transmission mode is one of the more practically useful features here — it lets you push data and power up to 250 meters over Cat5e or better, a real advantage when running cables to outdoor cameras or access points far from the switch room. The switch is fully IEEE 802.3af/at compliant, so it plays nicely with the vast majority of off-the-shelf PoE devices. Per-port short-circuit protection means a misbehaving device won't drag down the rest of your network; the affected port simply resets on its own. Add in 4KV lightning surge protection and a completely fanless metal housing, and you have a switch that is genuinely quiet and reasonably resilient for both indoor and outdoor-adjacent installations.

Best For

This unmanaged gigabit switch is best suited for installers and DIYers building out small camera systems — think four to eight IP cameras across a house, small office, or retail space. If you are running wireless access points and do not need VLAN segmentation or per-port monitoring, this handles the job without any setup friction. The extended cable range is particularly handy for properties where the network closet is not centrally located. It also works well in spots where noise matters — the fanless design keeps things silent, making it a solid fit for home offices, AV setups, or customer-facing reception areas. It is not the right tool for managed environments, but for straightforward PoE runs, it delivers solid value.

User Feedback

Buyers consistently highlight two things: how quickly this PoE switch is up and running, and how solid it feels for the price — the metal housing earns more positive comments than you might expect. On the critical side, a recurring concern is power budget headroom: users who load all eight ports with high-draw devices sometimes find the 96W ceiling tighter than anticipated. Long-term reliability feedback is mixed but mostly positive after several months of use; a minority of buyers report occasional port issues over time, which is not unusual for this market segment. Compatibility with common IP camera brands appears largely trouble-free, though some users note the switch cannot power non-PoE devices — easy to overlook if you skim the spec sheet.

#Switches
#Networking Products
#Computers & Accessories
#Electronics

Pros

  • True plug-and-play setup — most users are up and running in under five minutes with zero configuration.
  • The metal chassis feels surprisingly solid and well-built for the price point.
  • IEEE 802.3af/at compliance means broad compatibility with cameras, access points, and IP phones out of the box.
  • Extended transmission mode is a practical advantage for long cable runs that standard switches simply cannot handle.
  • Fanless operation keeps the switch completely silent — ideal for quiet environments.
  • Per-port fault recovery means one misbehaving device does not take down your entire network.
  • 4KV surge protection adds a meaningful layer of durability for outdoor or mixed-environment installs.
  • Compact footprint fits easily on a shelf, in a cabinet, or in a small network rack.
  • Includes a power adapter in the box — no additional purchases needed to get started.
  • Gigabit speeds on all ports, including the uplink ports, keep throughput strong across the board.

Cons

  • The 96W total power budget spreads thin when all eight ports are actively loaded with demanding devices.
  • No management interface means zero visibility into port status, traffic, or device activity.
  • Speed drops to 10 Mbps in extended mode, which limits usefulness for high-resolution camera feeds over long runs.
  • Non-PoE devices cannot draw power from this switch and must be powered separately, which adds setup complexity.
  • The one-year warranty is standard for the category — do not expect above-average after-sales protection.
  • No mounting hardware is included, so wall or rack installation requires sourcing brackets separately.
  • Long-term port reliability has produced some mixed feedback after extended months of continuous use.
  • A single shared power pool means there is no per-port power allocation control or budget management.

Ratings

The scores below for the Loocam LNA-SPG1008 8-Port Gigabit PoE Switch were generated by AI after analyzing verified buyer reviews from multiple global markets, with spam, bot-submitted, and incentivized feedback actively filtered out. The ratings reflect the honest distribution of real user experiences — both where this switch consistently delivers and where it falls short — so you can make a confident, eyes-open purchasing decision.

Ease of Setup
94%
This is consistently the most praised aspect across buyer feedback. Users installing camera systems for the first time report having devices online within minutes — no login page, no driver disc, no app to pair. For installers doing back-to-back jobs, that zero-friction startup adds up fast.
A small subset of buyers were caught off guard by the lack of any status indicators or feedback during first boot, making it briefly unclear whether the unit was functioning. There is no guided setup at all, which can unsettle total beginners who expect some kind of confirmation UI.
PoE Power Delivery
76%
24%
For typical deployments running standard IP cameras or access points drawing 8W to 15W each, the shared 96W budget holds up well and devices power on reliably without dropouts. Buyers running four to six moderately demanding devices report stable, consistent power delivery over extended periods.
The ceiling becomes a real issue when all eight ports are loaded with higher-draw devices simultaneously — some users have reported devices cycling or failing to negotiate power properly under a full load. The shared budget architecture means there is no way to reserve or prioritize power to critical ports, which is a genuine limitation.
Build Quality
83%
The all-metal chassis earns consistent positive comments from buyers who expected plastic at this price point. It feels dense and purposeful in hand, and several installers note it holds up well when mounted inside cabinets or stacked with other equipment over months of continuous use.
The port labeling can be faint under poor lighting conditions, and a few buyers noted the rubber feet are minimally adhesive and shift over time. For a unit sitting in a server closet it is a non-issue, but for visible installations the finish is utilitarian rather than refined.
Compatibility
88%
IEEE 802.3af/at compliance covers the vast majority of PoE cameras, access points, and IP phones on the market, and buyers rarely report compatibility surprises. Units from Hikvision, Dahua, Ubiquiti, and similar brands are commonly mentioned as working without any negotiation issues straight out of the box.
Non-PoE devices cannot draw power through the switch, which trips up buyers who assume all connected devices will be handled uniformly. A minority of users also report that certain proprietary PoE implementations from off-brand camera manufacturers did not negotiate cleanly, requiring a powered injector as a workaround.
Extended Transmission Range
71%
29%
For runs pushing beyond the standard 100-meter Ethernet limit, the extended mode is a practical differentiator that buyers working on large properties or sprawling warehouse layouts genuinely appreciate. Getting a camera powered and streaming 180 to 200 meters away without a repeater or secondary switch is a meaningful real-world win.
The speed drop to 10 Mbps in extended mode is a hard constraint that limits viable use cases — high-resolution or multi-stream cameras will struggle at that bandwidth ceiling. Buyers who did not read the spec carefully before running long cable pulls have expressed frustration discovering the throughput tradeoff after the fact.
Noise Level
97%
Completely fanless operation means there is zero audible output under any load condition, which buyers deploying this switch in home offices, recording spaces, or customer-facing reception areas consistently highlight as a standout advantage. No fan also means no fan failure, removing one of the most common long-term hardware failure points.
With no active cooling, the metal chassis does accumulate noticeable warmth during sustained heavy operation. In poorly ventilated enclosures or warm ambient environments, buyers have flagged that the chassis gets quite hot to the touch, which raises some understandable questions about long-term thermal stress.
Long-Term Reliability
67%
33%
The majority of buyers who have run this switch continuously for six months to over a year report no failures and stable daily operation across their camera setups. For straightforward, low-intervention deployments, the track record in buyer feedback is reasonably solid for the price tier.
A consistent minority of longer-term owners report individual port degradation or intermittent connectivity issues appearing after several months of use, which is a pattern worth noting. The one-year warranty is standard for this segment and not a strong safety net if problems emerge beyond that window.
Value for Money
91%
Measured against what comparable unmanaged gigabit PoE switches cost from more established networking brands, this switch delivers a genuinely competitive feature set at a price that leaves meaningful room in a project budget. Buyers installing basic surveillance systems on tight budgets consistently rate the cost-to-capability ratio as one of the strongest aspects.
The value equation shifts if you end up needing managed features later — at that point you are buying a second switch rather than upgrading, which effectively erases the initial savings. A handful of buyers also feel the 96W budget should be higher at this price, pointing to competing models with larger power pools at similar cost.
Port Count & Layout
82%
18%
Eight PoE ports plus two dedicated uplink ports in a chassis this compact is a practical layout that suits most small deployments without leaving wasted capacity. Having separate uplink ports rather than sacrificing PoE ports for uplink connections is a design decision buyers consistently appreciate when wiring up their installs.
For anyone whose deployment grows beyond eight devices, there is no expansion path short of adding a second switch, and the 2K MAC address table means very large flat networks are not well served. The physical port spacing is workable but tight with thick patch cables, particularly near the uplink ports.
Surge & Fault Protection
78%
22%
The 4KV lightning surge protection is a meaningful inclusion for outdoor camera installations or setups in areas prone to electrical storms, and buyers in those environments have noted it as a deciding factor over cheaper switches without it. Per-port short-circuit recovery also means a single faulty camera does not cascade into a broader network outage.
Surge protection at this level is a safeguard, not a guarantee — buyers in high-lightning regions report that direct or near-direct strikes can still cause damage despite the spec. The auto-recovery behavior after a port fault, while useful, occasionally triggers false positives on some devices during initial negotiation.
Packaging & Documentation
63%
37%
The unit arrives well-protected with adequate padding, and the included power adapter is a genuine convenience that removes one potential sourcing headache for buyers setting up their first PoE network. Most users find the physical installation intuitive enough that documentation is barely needed.
The installation guide is minimal to the point of being nearly useless for anyone unfamiliar with networking basics — it covers physical connections but offers no troubleshooting guidance or device compatibility context. Buyers who run into issues with power budgeting or extended mode have noted they had to seek answers from third-party forums rather than any included materials.
Thermal Management
69%
31%
Under typical loads with four to six active PoE devices, the fanless chassis manages heat adequately and the unit runs at a comfortable operating temperature without any active intervention. Buyers in well-ventilated spaces report no heat-related concerns even during extended continuous operation across all seasons.
Under sustained full eight-port load in warm or enclosed environments, heat buildup is a reported concern and a few buyers have measured surface temperatures that feel concerning for long-term component health. There are no thermal indicators or warnings on the unit itself, so users have no feedback loop unless they manually check.
Physical Footprint
86%
At under 0.96 lb and roughly the size of a thick paperback book, this switch tucks easily into tight installations — inside a wall cabinet, on a shelf behind a monitor, or zip-tied inside a camera enclosure housing. Installers running multiple sites particularly appreciate being able to carry several units in a single bag.
No rack-mount ears are included, which means clean rack integration requires sourcing a third-party adapter bracket separately — a minor friction point that is worth flagging for anyone building out a more structured equipment rack. The compact form factor also means port access can feel cramped when using bulky ethernet plugs.

Suitable for:

The Loocam LNA-SPG1008 8-Port Gigabit PoE Switch is a strong fit for DIY installers, small business owners, and home users who need a reliable way to power and connect multiple PoE cameras or wireless access points without touching a configuration interface. If you are setting up a security system with four to eight IP cameras across a house, warehouse, or small retail space, this switch handles the job cleanly and quickly. Installers who run dedicated surveillance networks — where simplicity and speed of deployment matter more than granular control — will find it particularly practical. The extended cable range, pushing up to 250 meters over Cat5e, is a genuine advantage for properties where devices are spread out far from the central network point. It also suits anyone who needs a fanless, silent switch for noise-sensitive spots like home offices, AV rooms, or reception desks.

Not suitable for:

The Loocam LNA-SPG1008 8-Port Gigabit PoE Switch is not the right choice for anyone who needs VLAN configuration, port monitoring, traffic prioritization, or any other managed switch features — there is simply no management layer here. Network administrators handling mixed or complex environments where QoS and segmentation are required should look at managed alternatives, even if the cost is higher. The 96W shared power budget is also a genuine constraint: if you plan to run eight ports loaded with high-draw devices simultaneously, you will likely hit the ceiling fast and find some devices underpowered. It is also not suited for powering non-PoE devices directly — those still need their own power source, which can catch buyers off guard. Anyone expecting enterprise-grade long-term reliability guarantees should note that the warranty coverage here is standard for this price tier and not exceptional.

Specifications

  • PoE Ports: The switch includes 8 PoE+ RJ45 ports supporting 10/100/1000 Mbps speeds, each capable of delivering up to 30W of power to connected devices.
  • Uplink Ports: Two dedicated 1000 Mbps gigabit uplink ports are included for connecting to a router or upstream network device.
  • PoE Power Budget: The total shared PoE power budget is 96W, supplied via an external DC 48V/2A power adapter included in the box.
  • PoE Standard: Fully compliant with IEEE 802.3af and IEEE 802.3at standards, ensuring automatic detection and compatibility with a wide range of standard PoE devices.
  • Extended Mode: An extended transmission mode stretches data and power delivery up to 250 meters over Cat5e or better cable, though speed is reduced to 10 Mbps at that range.
  • Surge Protection: Built-in 4KV lightning surge protection on all ports helps protect the switch and connected equipment from voltage spikes and electrical surges.
  • Switching Capacity: The switch operates with a total switching capacity of 20 Gbps using a store-and-forward architecture.
  • Forwarding Rate: The packet forwarding rate is 14.8 Mpps based on 64-byte packet size, suitable for typical small-network traffic loads.
  • MAC Address Table: Supports up to 2K MAC addresses with auto-learning, which is appropriate for small to mid-size local network deployments.
  • Jumbo Frames: Jumbo frame support up to 9KB is included, which can benefit large data transfers between compatible network devices.
  • Chassis: The housing is a fanless all-metal chassis designed for silent, passive cooling without any moving parts.
  • Dimensions: The unit measures 7.75 x 3.8 x 1.18 inches (197 x 96.5 x 30 mm), making it compact enough for shelf, cabinet, or small rack placement.
  • Weight: The switch has a net weight of 0.96 lb (0.44 kg), and a gross shipping weight of approximately 2.4 lb (1.09 kg) including packaging.
  • Operating Temp: Rated for operating temperatures between -10°C and 55°C (14°F to 131°F), with an operating humidity range of 10% to 90% RH non-condensing.
  • Flow Control: Supports IEEE 802.3X flow control to help manage traffic congestion and maintain stable data transmission under load.
  • Energy Standard: Compliant with IEEE 802.3az Energy Efficient Ethernet, allowing the switch to reduce power consumption on idle or low-activity links.
  • Included Items: The package includes the PoE switch unit, one external power adapter, and a basic installation guide.
  • Warranty: Loocam provides a one-year product warranty and states lifetime technical support with a 24-hour response commitment for support inquiries.

Related Reviews

BV-Tech POE-SW802G 8-Port Gigabit PoE+ Switch
BV-Tech POE-SW802G 8-Port Gigabit PoE+ Switch
79%
94%
Ease of Setup
88%
PoE Reliability
67%
Power Budget
61%
Build Quality
91%
Value for Money
More
LINOVISION POE-SW508G Industrial 8-Port PoE++ Switch
LINOVISION POE-SW508G Industrial 8-Port PoE++ Switch
77%
91%
Power Delivery
88%
Build Quality
93%
PoE Watchdog
84%
Installation Ease
86%
Thermal Performance
More
YuLinca 6-Port Gigabit PoE Switch with 4 PoE+ Ports
YuLinca 6-Port Gigabit PoE Switch with 4 PoE+ Ports
87%
95%
Ease of Installation
88%
PoE Functionality
91%
Build Quality
87%
Performance and Speed
94%
Fanless Operation (Noise)
More
Cqenpr 8-Port 120W Outdoor Gigabit PoE Switch
Cqenpr 8-Port 120W Outdoor Gigabit PoE Switch
80%
93%
Ease of Installation
88%
Weatherproof Durability
84%
PoE Power Delivery
79%
AI Watchdog Reliability
82%
Surge & Lightning Protection
More
MokerLink 8-Port Outdoor Gigabit PoE Switch
MokerLink 8-Port Outdoor Gigabit PoE Switch
81%
93%
Ease of Setup
84%
Build Quality
81%
PoE Performance
77%
Weather Resistance
89%
Gigabit Throughput
More
Reidubo P4810D-K 8-Port Gigabit PoE Switch
Reidubo P4810D-K 8-Port Gigabit PoE Switch
78%
93%
Ease of Setup
88%
PoE Reliability
67%
Power Budget Adequacy
82%
Build Quality
61%
VLAN Functionality
More
YuanLey 8-Port 120W Gigabit PoE Switch
YuanLey 8-Port 120W Gigabit PoE Switch
80%
91%
Value for Money
94%
Ease of Setup
78%
PoE Power Delivery
83%
Build Quality
74%
Thermal Performance
More
TRENDnet TPE-TG44G 8-Port PoE+ Gigabit Switch
TRENDnet TPE-TG44G 8-Port PoE+ Gigabit Switch
82%
94%
Ease of Setup
88%
PoE Reliability
86%
Build Quality
97%
Noise Level
62%
Thermal Performance
More
TRENDnet TPE-TG82G 8-Port Gigabit PoE+ Switch
TRENDnet TPE-TG82G 8-Port Gigabit PoE+ Switch
78%
93%
Plug-and-Play Setup
78%
PoE Power Delivery
88%
Build Quality
61%
Thermal Management
91%
Network Performance
More
TRENDnet TPE-TG80G 8-Port Gigabit PoE+ Switch
TRENDnet TPE-TG80G 8-Port Gigabit PoE+ Switch
85%
91%
Build Quality
88%
PoE Reliability
97%
Noise Level
94%
Ease of Setup
67%
Thermal Management
More

FAQ

No, there is no software, app, or web interface involved. You plug in the power adapter, connect your devices, and the switch handles everything automatically. It is genuinely plug-and-play with no configuration steps required.

Technically yes, but the 96W total budget is shared across all ports, which works out to roughly 12W per port on average if all eight are active. Most standard IP cameras and access points draw well under that, but if you have high-draw devices on multiple ports simultaneously, you may run into power constraints. It is worth adding up the wattage of your devices before committing to a full 8-port load.

If your cameras support IEEE 802.3af or 802.3at PoE standards, they should work without any issues. The Loocam LNA-SPG1008 8-Port Gigabit PoE Switch is broadly compatible with standard PoE devices from most major camera brands. If you are unsure about your camera, check the spec sheet for its PoE standard designation.

The switch will not damage non-PoE devices, but it also cannot power them. Non-PoE devices simply need to be plugged into their own power source separately. Data will still pass through the port normally.

The operating temperature range goes down to -10°C (14°F), so it can tolerate cool environments, but it is not weatherproof and should not be exposed to rain or moisture. For outdoor locations, you would want to house it inside a weatherproof enclosure or install it in a sheltered equipment cabinet.

When the switch detects a long cable run, it can automatically drop the port speed to 10 Mbps to maintain a stable connection beyond the standard 100-meter Ethernet limit, up to about 250 meters. This is useful for reaching distant cameras, but keep in mind that 10 Mbps limits the video bandwidth, so very high-resolution or high-bitrate streams may struggle over those long runs.

Not at all — the fanless design means there are no moving parts and zero noise. It is a genuinely silent piece of hardware, which makes it a solid choice for home offices, reception areas, or AV setups where fan noise would be disruptive.

For standard 100-meter runs at full gigabit speed, Cat5e or Cat6 is recommended. For extended mode runs beyond 100 meters, Cat5e is the minimum, and Cat6 is preferable for maintaining signal quality over longer distances.

A power adapter is included in the box, so you do not need to source one separately. The included adapter outputs DC 48V at 2A, which is what the switch requires to hit its full 96W PoE budget.

Loocam covers the switch with a one-year warranty and states that their technical support team responds within 24 hours. That is a standard coverage level for this product category — it is not exceptional, but it is a reasonable baseline. Keep your purchase receipt handy in case you need to make a warranty claim.

Where to Buy

eBay
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch
In stock $57.51
Buy Now
Newegg.com
Loocam LNA-SPG1008 8-Port Gigabit PoE Switch
In stock $69.99
Buy Now