Manfrotto Grub Screws - Set of Five
UPC's:
MPN's:
Great personal attendence
I've been to the store last january that was an old wish and bought a sony a7III. And I took the opportunity to buy the screw on the manfrotto tripod that I had lost. I explained that I lost it because I wanted to remove the head from the tripod to fit in the suitcase, to which the attendant showed me that it was not necessary since the central axis can be removed. I would never know that since the manual is not clear on how to do this.
Reviewed on B&H Photo Video
Perfect fit
I was surprised and pleased to find these grub screws available on B&H, after finding one of three missing from my 15 year old Manfrotto tripod. Not knowing if these screws would fit, i took a chance and ordered them. I was pleased that they were a perfect fit.
Reviewed on B&H Photo Video
Exactly as Advertised
I needed a set of 3 of these for a set of used tripod legs I recently bought that were missing these (Manfrotto Bogen 30121N). I mounted a Manfrotto 410 Junior geared head on it and these screws keep the head from unscrewing off the legs.
Reviewed on B&H Photo Video
Perfect for 128RC tripods
We have three 128RC tripods, all of which have lost one or two of these grub screws over time. This set of screws is exactly the replacement hardware needed to tighten the loose heads on our tripods.
Reviewed on B&H Photo Video
Incorrect size for Manfrotto 755CX3
One size doesn't fit all. Replacement for the 755CX3, you'll need R3 0141 M5. Frustrating!
Reviewed on B&H Photo Video
Screwed by Manfrotto!
Having picked a nice and sturdy Camera stand, I needed a new head and, because of thism It required s small set of small grubsces. Of course, they worked like a small screw should work without any problems or snafus. As they are a small bit of a specialty crew, I would recommend these anytime.
Reviewed on B&H Photo Video
I would buy this product again.
Had two grub screws fall out of tripod. Didn't notice at the time. Difficult to track down on line. B&H had exactly what I required. Shipping very prompt and the grub screws were a perfect match.
Reviewed on B&H Photo Video
Necessary Stability Savers
Lost one screw nearly 2 years back and have hobbled along tightening as best we could with one tripod. Always reminding ourselves to get screws someday. Finally after buying these I recall what stability was again. Perfect fit for Manfrotto tripods.
Reviewed on B&H Photo Video
Hard to find screws.
These grub screws are hard to find but B and H has them. They arrived quickly and are a perfect fit for my Manfrotto tripods.
Reviewed on B&H Photo Video
Exactly what I needed
I lost a couple of grub screws several years ago on my Manfrotto tripod/head. I contacted Manfrotto customer service and even scanned a picture of what I needed and Their customer service could not help me. I am thrilled that B&H could help me!!
Reviewed on B&H Photo Video
Solid product
No surprises here. The screws fit my tripod and head perfectly. I received sceews in a timely manner as well.
Reviewed on B&H Photo Video
perfect fit on 10 years old tripod.
Manfrotto use the same screws for the tripod that they manufacturer long time ago. Fit frefectly.
Reviewed on B&H Photo Video
Perfect fit for hard to find screws
These screws fit the Manfrotto tripods perfectly. Found other screws via local hardware specialty shop that just would not hold the tension. Very important to not have problems with these screws while shooting.
Reviewed on B&H Photo Video
Great Grubs
For me, these are hard to find. I looked all over for them, not knowing the correct name to look for. B&H came through, I should have looked here first. Now when I need some more Grubs I know where to look. And they a genuine Manfrotto product.
Reviewed on B&H Photo Video
Great Grubs
These little suckers are hard to find. I looked for these on the internet, but not knowing they were called Grub Screws I could not find them, but good old B&H came through. So, I ordered some extras so the next time I loose any of my Grubs I have some spares, hopefully I can remember where I stashed them.
Reviewed on B&H Photo Video
Cheap replacement
I don't know how the original grub screws were lost, but one day I noticed two of the three missing. These are a perfect replacement, and now I have a few extra on hand. Perhaps using a dab of the lowest grip threadlock would help
Reviewed on B&H Photo Video
Exactly What I Needed--Great Product
Bought a used Manfrotto 3001N tripod but it came without the Grub Screws to secure the head. These are the exact same OEM part and worked perfectly. It is important to properly secure the head to insure proper working of the tripod & head combo and to prevent damage to your camera.
Reviewed on B&H Photo Video
To Every Screw, Turn, Turn, Turn ...
These hold the Manfroto ball head onto my Manfrotto tripod much better than actual grubs, but must be replaced periodically when one of the grub screws leaves to transform into a wingnut. And the circle of life continues.
Reviewed on B&H Photo Video
Grubs!
what's there to say, these guys are super easy to lose but so important to some manfrotto tripods. I tend to lose these all the time as I use my manfrotto 501 as a fluid head on my slider. I always come back here to replace them as honestly why wouldn't I? If Bh doesn have it most likely no one will. the screws themselves are as legit as they can come. they work great and I never had an issue with then. They screw, they tighten, they make sure your shot can happen.
Reviewed on B&H Photo Video
Best Replacement Grub Screws Ever!
On a recent vacation I took along my Manfrotto 055CXPRO4 Carbon Fiber 4 Section Tripod and Markins Q-Ball Q10 w/ Lever Release (Black). I had to remove the head to fit the tripod in my suitcase. I loosed the grub screws and removed the head. On my arrival I replaced the Markin's head but never tightened the grub screws. After a day of hiking it occurred to me that they were not tighted so I checked them. Unfortunately two of the three had wiggled... Show More
Reviewed on B&H Photo Video
