Memphis Audio SRXP62C 6.5″ Component Speaker System

Memphis Audio SRXP62C 6.5″ Component Speaker System — image 1
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 2
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 3
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 4
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 5
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 6
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 7
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 8
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 9
Memphis Audio SRXP62C 6.5″ Component Speaker System — image 10
76%
24%
86%
Sound Clarity & Imaging
84%
Tweeter Performance
91%
Sensitivity & Efficiency
79%
Value for Money
54%
Open-Box Condition
87%
Midrange Detail
69%
Bass Response
83%
Build Quality
76%
Crossover Quality
67%
Amplifier Compatibility
74%
Installation Experience
88%
Mounting & Fitment
51%
Warranty & Support
More

Overview

The Memphis Audio SRXP62C 6.5″ Component Speaker System sits squarely in Memphis Audio’s SRX Pro lineup, a range designed for enthusiasts who want genuine performance without spending boutique money. This component speaker set is sold used and open box, so buyers should go in with adjusted expectations around packaging and cosmetic condition — inspect carefully upon arrival. That said, the core opportunity here is real: a properly engineered component system that separates the tweeter, mid-bass driver, and crossover, giving you the kind of staging control coaxials simply can’t offer. One thing to confirm before ordering: 6-ohm impedance is slightly outside what most amplifiers are optimized for, so check your amp’s specs first.

Features & Benefits

A 94 dB sensitivity rating is the headline spec here, and it matters in practice: at that efficiency, these 6.5-inch components can get genuinely loud without needing a high-powered amplifier behind them. The ultra-light treated paper cone is part of what makes that possible. The cloth-treated accordion surround adds meaningful excursion, which helps the mid-bass driver produce fuller low-midrange output — though keep expectations realistic, since these are not subwoofers. A 1.5-inch voice coil comfortably handles 125W RMS, and the hefty 22-oz magnet contributes to accurate, controlled response. At 2.44 inches deep, door panel fitment in most vehicles should be straightforward, which is a genuine practical advantage.

Best For

The Memphis SRX Pro system is a strong match for anyone upgrading from stock or entry-level coaxials who wants a clear jump in imaging. It rewards DIY installers who know how to position separate tweeters thoughtfully — A-pillars and sail panels are common spots. On the amplifier side, something in the 75 to 150W RMS per channel range is the sweet spot, and confirming 6-ohm compatibility beforehand is a must. These 6.5-inch components excel at vocal and midrange clarity, not deep bass, so pair them with a dedicated subwoofer if low-end extension matters to you. Buyers comfortable with open-box purchases stand to get solid performance at a meaningful discount.

User Feedback

With a 4.2-star average from 63 buyers, this component speaker set has a respectable track record — not a massive sample, but enough to spot real patterns. The most consistent praise centers on midrange clarity and imaging, with buyers noting the tweeters blend well without becoming fatiguing over time. Build quality relative to the price point also comes up frequently. On the downside, open-box condition is the biggest variable — some buyers received units with minor cosmetic wear or non-original packaging, which is an honest trade-off to weigh. Grills are not included, and a few reviewers mention that caught them off guard. Those running an external amplifier consistently report better results than those relying on head unit power alone.

#Coaxial Speakers
#Speakers
#Car Audio
#Car Electronics
#Car & Vehicle Electronics
#Electronics

Pros

  • High 94 dB sensitivity means loud, clear output without requiring a powerful amplifier.
  • Separate tweeters and crossovers deliver imaging and soundstage that coaxials cannot replicate.
  • The 1.5-inch voice coil handles 125W RMS cleanly, giving headroom for amplified systems.
  • Shallow 2.44-inch mounting depth fits most standard door panels without cutting or major modification.
  • The 22-oz magnet provides tight, controlled low-midrange response that holds up at higher volumes.
  • Cloth-treated accordion surround allows greater excursion for fuller mid-bass output from a compact driver.
  • Memphis Audio has a strong enthusiast reputation, and the SRX Pro line reflects that build quality.
  • Open-box pricing offers access to a reputable component set at a lower cost than new equivalents.
  • At 1.38 pounds per driver, these 6.5-inch components are easy to handle during installation.
  • Buyers consistently praise the tweeters for blending naturally without harshness or listening fatigue.

Cons

  • Open-box condition varies — some buyers have received units with cosmetic wear or non-original packaging.
  • Grills are not included, which may matter for installations where driver protection is a priority.
  • The 6-ohm impedance requires amplifier compatibility checks that 4-ohm standard speakers do not.
  • Component installation demands more wiring effort and tweeter placement decisions than a simple coaxial swap.
  • Limited warranty coverage on a used unit adds financial risk if the drivers arrive with hidden defects.
  • These are mid-bass drivers only — without a dedicated subwoofer, low-end output will feel lacking.
  • Head-unit-only setups will underperform; these speakers genuinely need an aftermarket amplifier to shine.
  • With only 63 ratings, long-term reliability data is thinner than for more widely reviewed competitors.

Ratings

Our AI rating system analyzed verified buyer reviews for the Memphis Audio SRXP62C 6.5″ Component Speaker System from multiple global sources, actively filtering out incentivized, bot-generated, and duplicate feedback to ensure the scores reflect genuine ownership experiences. The result is a transparent breakdown of where this component set genuinely earns its praise and where real-world pain points consistently surfaced. Both the highs and the frustrations are reflected honestly below.

Sound Clarity & Imaging
86%
When paired with a capable aftermarket amplifier, the separation between the SRPT tweeters and mid-bass drivers produces a soundstage that buyers consistently describe as noticeably wider and more precise than any coaxial replacement. Vocals and acoustic instruments in particular come through with real presence and placement, which makes a meaningful difference on long highway drives or in attentive listening sessions.
A handful of buyers noted that without careful tweeter positioning, the imaging advantage diminishes considerably. Those who mounted the tweeters in non-optimal locations reported a less cohesive sound that didn’t fully justify the added complexity of a component install over a quality coaxial.
Tweeter Performance
84%
The SRPT series tweeters are a genuine highlight of this system, blending into the upper frequency range without the brightness or harshness that plagues cheaper component sets. Buyers who listen to genres with a lot of cymbal work, female vocals, or acoustic guitar consistently praise the top-end for sounding natural rather than artificially crisp.
A few users found the tweeters slightly aggressive at higher volumes in smaller cabin vehicles like hatchbacks, where high frequencies can become fatiguing over extended listening. Tweeter placement and crossover tuning sensitivity mean results vary more than with a coaxial setup.
Sensitivity & Efficiency
91%
At 94 dB, this component set is one of the more efficient options at its price tier, and buyers running modest amplifiers in the 80 to 100W RMS range reported getting genuinely loud, clean output without pushing the amp hard. That efficiency translates to practical benefits on the road — less strain on the electrical system and better dynamic headroom.
The efficiency advantage is most relevant to amplified setups; buyers running these directly from head unit power reported adequate but uninspiring volume levels that didn’t reflect the 94 dB spec’s potential. The spec alone can create slightly inflated expectations for passive installs.
Value for Money
79%
21%
In open-box condition, this component set offers access to a Memphis Audio mid-tier SRX Pro system at a cost that undercuts comparable new offerings from Rockford Fosgate or JL Audio. For buyers who know what they’re getting and inspect the unit carefully on arrival, the performance-to-cost ratio is genuinely competitive.
The value equation depends heavily on the condition of the specific unit received, and buyers who got units with cosmetic damage or missing accessories felt the discount didn’t fully compensate for the risk and inconvenience. Open-box pricing is compelling only when the condition holds up, which isn’t guaranteed.
Open-Box Condition
54%
46%
A meaningful portion of buyers reported receiving units in very acceptable shape — lightly handled, functionally perfect, and close to what a new unit would deliver. For these buyers, the open-box designation felt like a minor concern rather than a real problem.
Condition inconsistency is the single most common complaint across the review pool. Some buyers received drivers with scuffs, bent terminals, or no original packaging at all, and the absence of grills means the cones have less protection during transit. Without a reliable grading standard disclosed at purchase, buyers are essentially accepting condition uncertainty as part of the deal.
Midrange Detail
87%
The ultra-light treated paper cone delivers clean, articulate midrange reproduction that holds up well across varied music genres. Buyers who listen to rock, jazz, or spoken-word content specifically praised how natural and uncolored the midrange sounds compared to coaxials in the same price range.
At very high output levels, a small number of buyers detected a slight thinning in the upper midrange that suggested the cone was reaching its comfort zone. This was rare and typically only noticed in configurations pushing the drivers near their rated power ceiling.
Bass Response
69%
31%
The cloth-treated accordion surround does give these mid-bass drivers more low-end body than a standard rubber-surround coaxial would produce at this size. Buyers upgrading from thin factory speakers noticed a fuller, warmer character in the lower midrange that made music feel less hollow at moderate volumes.
Buyers expecting genuine bass performance from this set were frequently disappointed — these are mid-bass drivers by design, and without a dedicated subwoofer handling the lower octaves, the overall sound can feel lean on bass-heavy genres. Setting realistic expectations here is critical before purchasing.
Build Quality
83%
The 22-oz magnet and 1.5-inch voice coil feel appropriately substantial for the price tier, and buyers who opened the packaging commented on how well the drivers are constructed compared to similarly priced alternatives. The cloth surround, in particular, appeared well-bonded and consistent across units.
Some buyers who received open-box units noted that the drivers showed minor signs of prior handling, including light marks on the magnet housing or minor scuffs on the basket. While these were cosmetic rather than functional issues, they did undermine confidence in the perceived build quality for some buyers.
Crossover Quality
76%
24%
The included passive crossovers are capable units that handle frequency division cleanly without introducing audible coloration at typical listening volumes. Buyers who opted not to run active crossover setups found the passive network sufficient for a natural blend between the tweeter and mid-bass driver.
Installers looking for more advanced crossover tuning options — like adjustable slopes or tweeter level attenuation — found the included crossovers too basic for precise room correction. The passive units are adequate but won’t satisfy buyers coming from DSP-based systems.
Amplifier Compatibility
67%
33%
Most buyers running 4-ohm-stable amplifiers in the 75 to 150W RMS per channel range reported solid compatibility and stable performance with no issues. The 94 dB sensitivity also helped offset any output variance caused by the 6-ohm impedance mismatch.
The 6-ohm nominal impedance is a real compatibility concern that surprised several buyers who assumed standard 4-ohm behavior. Some amplifiers showed elevated protection sensitivity or delivered noticeably less output than expected, and a few buyers had to reconfigure their setups after installation to compensate.
Installation Experience
74%
26%
For experienced DIY installers, the shallow 2.44-inch mounting depth made door panel fitment straightforward in most common vehicles, and the included hardware and crossovers simplified the wiring process. Several buyers highlighted how clean the finished install looked compared to previous coaxial setups.
First-time component system installers frequently underestimated the effort required to route separate tweeter wiring and select mounting locations. The lack of an installation guide tailored to specific vehicle models left some buyers working through a trial-and-error process that added significant time to the project.
Mounting & Fitment
88%
The 2.44-inch mounting depth is one of the most practically useful specs on this set, and it paid off for buyers in vehicles with notoriously shallow door cavities. Multiple reviewers mentioned fitting these in doors where previous 6.5-inch speakers required spacers, and the SRXP62C dropped in cleanly without modification.
A small number of buyers with older domestic vehicles found the basket diameter slightly tight against factory mounting rings, requiring minor trimming. While this is uncommon, it’s worth double-checking actual cutout dimensions against your specific vehicle before assuming a tool-free fit.
Warranty & Support
51%
49%
Memphis Audio is an established brand with accessible customer support, and some buyers reported positive experiences reaching out directly to confirm component compatibility or get installation guidance. The brand’s reputation in the enthusiast community provides some baseline confidence even on used units.
The limited warranty on an open-box or used unit is genuinely thin coverage, and several buyers were unclear about what was actually covered and for how long after receiving their unit. Without explicit warranty documentation included in the box, buyers are left to navigate support on a case-by-case basis, which adds post-purchase uncertainty.

Suitable for:

The Memphis Audio SRXP62C 6.5″ Component Speaker System is well-suited for car audio enthusiasts who are ready to step past factory speakers or basic coaxials and want a genuine improvement in soundstage and vocal clarity. If you already have — or plan to install — an aftermarket amplifier putting out roughly 75 to 150W RMS per channel, this system is designed to make the most of that power while keeping efficiency high at 94 dB sensitivity. DIY installers who are comfortable running separate tweeter wires and making deliberate placement decisions will get the most out of the separate SRPT tweeters and included crossovers. The shallow 2.44-inch mounting depth also makes these a practical fit for a wide range of door panels without major modification. Buyers who are open to open-box condition in exchange for meaningful savings on a reputable mid-tier brand will find the value proposition here genuinely compelling, provided they inspect the unit carefully upon arrival.

Not suitable for:

The Memphis Audio SRXP62C 6.5″ Component Speaker System is not the right choice for buyers expecting plug-and-play simplicity or factory-radio performance, since component systems require more installation effort and reward amplified setups. Anyone prioritizing deep bass extension should look elsewhere — these are mid-bass drivers, not subwoofers, and pairing them without a dedicated sub will leave low-end output noticeably thin. The 6-ohm impedance is a real compatibility concern: most aftermarket amplifiers are rated for 4-ohm loads, and running 6-ohm speakers can affect output levels and amp matching, so confirming specs beforehand is essential rather than optional. Buyers who need grills included should note they are absent from this listing. Those unwilling to accept any risk around cosmetic wear, non-original packaging, or limited warranty coverage that typically comes with used open-box goods should consider purchasing new instead.

Specifications

  • Speaker Size: Each mid-bass driver measures 6.5 inches in diameter, a standard fitment size compatible with a wide range of factory door and dash locations.
  • Power Handling: The system is rated at 125W RMS and 250W peak per channel, making it well-matched to mid-output aftermarket amplifiers.
  • Sensitivity: At 94 dB sensitivity, these drivers produce high output efficiently, requiring less amplifier power to achieve loud, clear sound levels.
  • Impedance: Nominal impedance is 6 ohms, which is slightly above the 4-ohm standard most aftermarket amplifiers are optimized for.
  • Voice Coil: A 1.5-inch voice coil handles thermal load during high-power use and contributes to clean, stable performance at elevated volumes.
  • Magnet Size: The 22-oz magnet provides strong motor force, supporting accurate and controlled low-midrange response under demanding playback conditions.
  • Mounting Depth: At 2.44 inches, the shallow mounting depth allows fitment in most standard vehicle door panels without requiring custom spacers or cutout modifications.
  • Surround Material: The cloth-treated accordion surround is designed to allow greater cone excursion than a standard rubber surround, supporting fuller output from a mid-bass driver.
  • Cone Material: The ultra-light treated paper cone is engineered for high SPL output while keeping moving mass low to preserve transient accuracy.
  • System Type: This is a component speaker system, meaning the mid-bass driver, SRPT series tweeter, and crossover are separate units installed independently.
  • Tweeter Type: The included SRPT series tweeters are designed to integrate with the passive crossovers for balanced frequency blending across the stereo pair.
  • Crossovers: Two passive crossover units are included in the set, one per channel, to manage frequency division between the tweeter and mid-bass driver.
  • Configuration: The system ships as a stereo pair, providing all components needed for a full two-channel front-stage installation.
  • Grills: Speaker grills are not included with this listing, so buyers who need driver protection should plan to source compatible grills separately.
  • Box Dimensions: The product box measures 3.15″ deep by 11.77″ wide by 15.12″ tall and weighs 1.38 pounds as packaged.
  • Condition: This unit is sold as used and open box, meaning it has been previously opened and may show minor cosmetic wear or non-original packaging.
  • Warranty: Coverage is described as a limited warranty; buyers should contact Memphis Audio directly to confirm what terms apply to open-box or used units.
  • Brand / Line: This component set is part of Memphis Audio’s SRX Pro lineup, positioned as a performance-oriented mid-tier option within the brand’s broader car audio range.

Related Reviews

JBL GTO609C 6.5″ Component Speaker System
JBL GTO609C 6.5″ Component Speaker System
77%
88%
Sound Clarity
71%
Bass Performance
84%
Tweeter Quality
74%
Installation Ease
86%
Compatibility with Stock Radios
More
Memphis Audio PRX602 6.5″ Coaxial Speakers
Memphis Audio PRX602 6.5″ Coaxial Speakers
79%
84%
Sound Clarity
58%
Bass Response
88%
Tweeter Performance
86%
Swivel Tweeter System
91%
Installation Ease
More
BOSS Audio MR6B 6.5-inch Marine Speakers
BOSS Audio MR6B 6.5-inch Marine Speakers
71%
88%
Value for Money
91%
Ease of Installation
74%
Weatherproofing
67%
Sound Quality
48%
Bass Response
More
Stinger HC-65C 6.5″ Component Car Speakers
Stinger HC-65C 6.5″ Component Car Speakers
76%
83%
Sound Clarity
61%
Bass Performance
81%
High-Frequency Detail
58%
Volume & Loudness
84%
Installation Ease
More
Alpine SPR-60C 6.5″ Component Car Speakers
Alpine SPR-60C 6.5″ Component Car Speakers
80%
93%
Sound Clarity
91%
Soundstage & Imaging
88%
Crossover Quality
74%
Bass Response
89%
Amplifier Compatibility
More
KICKER CSS654 6.5-Inch Component Speaker System
KICKER CSS654 6.5-Inch Component Speaker System
79%
91%
Sound Clarity
61%
Bass Performance
88%
Tweeter Quality
67%
Installation Experience
83%
Value for Money
More
MB Quart FSB216 6.5-Inch Component Speakers
MB Quart FSB216 6.5-Inch Component Speakers
73%
84%
Sound Clarity
81%
Soundstage & Imaging
62%
Bass Response
78%
Tweeter Performance
88%
Value for Money
More
Rockford Fosgate T2652-S 6.5″ Component Speaker System
Rockford Fosgate T2652-S 6.5″ Component Speaker System
84%
93%
Sound Clarity
89%
Build Quality
91%
Soundstage & Imaging
58%
Installation Experience
94%
High-Frequency Performance
More
Infinity REF-6530CX 6.5-inch Component Car Speakers
Infinity REF-6530CX 6.5-inch Component Car Speakers
78%
88%
Sound Clarity
84%
Tweeter Performance
63%
Bass Response
86%
Soundstage & Imaging
71%
Installation Ease
More
JBL Stage 3607CF 6.5″ Component Speaker System
JBL Stage 3607CF 6.5″ Component Speaker System
77%
83%
Sound Quality
88%
Midrange Performance
47%
Bass Response
76%
Tweeter Performance
82%
Value for Money
More

FAQ

They will technically work with a factory head unit, but you won’t get close to the best performance that way. The Memphis Audio SRXP62C 6.5″ Component Speaker System is designed to shine with an aftermarket amplifier in the 75 to 150W RMS per channel range. Running them off head unit power alone tends to produce flat, underwhelming results based on what reviewers consistently report.

Most aftermarket amplifiers are designed and rated around a 4-ohm load, so a 6-ohm speaker will draw less current and may produce slightly lower output than the amp’s rated specs suggest. It’s not a dealbreaker, but you should check your amp’s manual to confirm it is stable at 6 ohms and won’t trigger protection mode. When in doubt, contact the amp manufacturer before committing.

Open box means the product was previously purchased and returned or opened before sale, and original retail packaging may be absent or damaged. When your unit arrives, check the cone and surround on each driver for any tears, dents, or deformation, and make sure the tweeter domes are intact. Confirm both crossover units are present and that no terminals are bent or corroded.

No, grills are not included with this listing, and several buyers have mentioned being surprised by that. If you need grills for aesthetic reasons or to protect the cones, you’ll need to source compatible 6.5-inch grills separately from Memphis Audio or a third-party supplier.

Component systems take more effort than dropping in a coaxial pair. You’ll need to run separate wiring for the tweeters, mount them in a suitable location like the A-pillar or sail panel, and wire the passive crossovers in line. If you’re comfortable with basic car audio wiring, it’s a manageable DIY project, but first-timers may want to budget time for research or professional installation.

The 2.44-inch mounting depth is on the shallow side, which helps a lot with fitment in common vehicles. Most standard factory 6.5-inch locations will accommodate these without requiring custom spacers, though you should always measure your specific door cavity before purchasing since vehicle architecture varies.

These are mid-bass drivers, not subwoofers, so they handle the lower midrange and some upper bass frequencies well but are not designed to reproduce deep low-end. If you care about feeling bass in your music, adding a dedicated subwoofer is highly recommended. Think of this component set as responsible for the clarity, imaging, and midrange detail in your system, with a sub handling everything below that.

At the price these sell for in open-box condition, the Memphis SRX Pro system competes favorably on sensitivity and build quality. Brands like Rockford Fosgate and JL Audio have strong reputations at similar price tiers, but buying open-box here can put you into Memphis’ mid-tier performance range at a lower effective cost. The trade-off is the condition uncertainty that comes with any used purchase.

The listing describes limited warranty coverage, but warranty terms on used and open-box items can vary significantly from what a new unit would carry. Your best move is to contact Memphis Audio’s customer support directly and provide the serial number to confirm what coverage, if any, still applies to your specific unit.

Yes, if you have a head unit or processor with active crossover outputs and a multi-channel amplifier, you can bypass the included passive crossovers and run the tweeters and mid-bass drivers on separate amplifier channels with active crossover control. This gives you more precise tuning but requires more complex wiring and DSP setup. The passive crossovers included in the box are there for buyers who prefer a simpler installation path.