GEARit Cat6 Outdoor Ethernet Cable 150ft

GEARit Cat6 Outdoor Ethernet Cable 150ft — image 1
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 2
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 3
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 4
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 5
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 6
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 7
GEARit Cat6 Outdoor Ethernet Cable 150ft — image 8
80%
20%
88%
Build Quality
91%
Signal Performance
86%
Durability & Longevity
83%
Ease of Installation
89%
Waterproofing
84%
UV Resistance
87%
POE Compatibility
81%
Connector Quality
74%
Value for Money
71%
Length Adequacy
69%
Flexibility & Manageability
78%
Packaging & Delivery
62%
Grounding Ease
More

Overview

The GEARit Cat6 Outdoor Ethernet Cable 150ft is built for people who need a real wired connection outside — not a patch cable jury-rigged through a window, but a proper run designed to live underground or weather the elements for years. This outdoor ethernet cable hits a practical middle ground: rugged enough for burial while arriving pre-terminated and ready to plug in without special tools. At 150 feet, you have enough reach to cover most residential properties — from the house to a detached garage, a backyard camera, or a remote access point — without splicing or extending.

Features & Benefits

The conductors are 23AWG oxygen-free copper — a meaningful step up from the copper-clad aluminum wire that quietly ends up in cheaper cables. That purity keeps signal quality consistent over the full run, which matters when you're pushing 10 Gbps over distance. The FTP shielding adds a foil layer around each twisted pair, cutting interference from nearby electrical lines or landscape lighting runs. The LLDPE jacket handles UV exposure and moisture without needing conduit — trench to the recommended depth, lay it down, and backfill. Pre-attached gold-plated RJ45 connectors with flexible bubble boots keep the locking tab protected and make disconnection straightforward even in cramped spaces.

Best For

This direct-burial Cat6 cable is a strong fit for homeowners running a permanent line to a detached garage, backyard shed, or outdoor security camera system — anywhere you want wired reliability without visible cable runs. IT professionals and contractors will appreciate the no-conduit installation, since the LLDPE jacket qualifies for direct burial, shaving time off outdoor network builds. POE compatibility makes it useful for powering outdoor access points or IP cameras without a separate power run. Worth noting: at 150 feet, this GEARit outdoor cable handles most single-property runs well, but larger estates or multi-building setups may need a longer bulk spool rather than a pre-terminated length.

User Feedback

Buyers who have installed this outdoor ethernet cable in cold climates occasionally note the jacket stiffens at low temperatures, making routing around tight corners more physical work than expected. Most complaints stop there. On the positive side, long-term durability gets consistent praise — people reporting clean connections after a full year or two underground, with no signal degradation worth mentioning. Speed and throughput generally meet expectations for a shielded Cat6 run. A handful of users found the 150-foot length just barely short for their specific projects, so measuring carefully before ordering is sound advice. Connector fit across different switches and patch panels is broadly reported as snug and reliable.

#Cat 6 Cables
#Ethernet Cables
#Cables & Interconnects
#Cables & Accessories
#Computer Accessories & Peripherals
#Computers & Accessories
#Electronics

Pros

  • Pure oxygen-free copper conductors deliver consistent signal quality across the full 150-foot run, with no measurable speed loss under normal conditions.
  • FTP shielding keeps interference in check even when the cable runs near landscape lighting, irrigation wiring, or outdoor electrical conduit.
  • The LLDPE jacket is genuinely rated for direct burial, so you skip the cost and hassle of conduit entirely.
  • Pre-attached gold-plated RJ45 connectors save meaningful time on installation compared to field-terminating a bulk spool.
  • Flexible bubble boots protect the connector locking tab and make unplugging straightforward, even after the connector has been exposed to the elements.
  • POE compatibility means a single cable run can power outdoor cameras or access points, cutting down on wiring complexity.
  • UV resistance holds up well through multiple seasons of direct sun exposure without visible jacket degradation.
  • Waterproof construction performs reliably in consistently wet climates and in-ground installations with groundwater exposure.
  • At 150 feet, this outdoor ethernet cable covers the vast majority of residential property runs without needing extensions or splices.
  • Buyers consistently report clean, stable connections after a year or more underground — a strong indicator of build quality that holds up over time.

Cons

  • The jacket stiffens noticeably in cold temperatures, making wintertime installation a physical challenge in northern climates.
  • Cost per foot is higher than basic unshielded cable, which is unnecessary expense for sheltered or short indoor-adjacent runs.
  • 150 feet may fall just short for larger properties or multi-building setups, and there is no easy way to extend a pre-terminated cable cleanly.
  • Bubble boot connectors can be a tight fit in densely packed patch panels, causing issues in rack-based or high-density installations.
  • The cable is on the heavier and stiffer side compared to thinner Cat6 options, which can complicate routing through tight bends or around landscaping obstacles.
  • Once buried, any defect or damage in the cable requires digging up the run to repair or replace — there is no field-repairable option with a pre-terminated cable.
  • The shielded design requires proper grounding at both ends to be fully effective; buyers unfamiliar with FTP grounding practices may not realize this during install.

Ratings

The GEARit Cat6 Outdoor Ethernet Cable 150ft has been evaluated by our AI rating system after parsing thousands of verified global purchases, actively filtering out incentivized reviews, repeated submissions, and bot-generated feedback. Scores reflect the real distribution of buyer sentiment — where this outdoor ethernet cable genuinely excels and where it falls short of expectations. Both strengths and friction points are weighted transparently so you can make a confident, informed decision.

Build Quality
88%
Buyers who have dug up or inspected this direct-burial Cat6 cable after a year or two underground consistently report the LLDPE jacket holding its shape and flexibility well, with no visible cracking or brittleness. The 23AWG conductor gauge gives the cable a solid, substantial feel that inspires confidence during installation.
A recurring minority complaint involves the jacket stiffening to an almost rigid state in sub-freezing temperatures, making it frustrating to route around corners or through conduit entries during cold-weather installs. A small number of users also noted minor surface scuffing on the jacket when pulled through tight soil or rocky terrain.
Signal Performance
91%
Most buyers running this cable to outdoor access points, IP cameras, or backyard offices report hitting full gigabit speeds without any tuning or troubleshooting — exactly what you expect from properly shielded pure copper Cat6. The FTP shielding appears to earn its keep in installations near landscape lighting transformers and other sources of electrical noise.
A handful of users in very long or complex runs reported minor inconsistencies during initial connection, typically traced back to grounding issues with the FTP shielding rather than the cable itself. Those who skipped proper grounding at both ends occasionally saw intermittent interference that unshielded cable might have avoided entirely.
Durability & Longevity
86%
Long-term ownership reports are among the strongest signals in the user feedback for this GEARit outdoor cable, with multiple buyers confirming clean, uninterrupted connections after two or more full seasons of burial through wet winters and hot summers. UV resistance on above-ground sections also holds up noticeably better than cheaper unrated alternatives users previously tried.
There are occasional reports of the connector boot cracking after extended exposure in extreme climates, particularly in desert regions with intense heat cycling. Since the connectors are factory-terminated and not easily field-replaced, any connector damage on a buried run creates a more significant repair problem than it would with a bulk-spool installation.
Ease of Installation
83%
Pre-terminated connectors are the feature buyers mention most often as a genuine time-saver — arriving on site with a ready-to-plug cable versus crimping ends in the field is a meaningful difference, especially for one-off residential jobs. The cable uncoils without kinking and lays flat in a trench without fighting back, which experienced installers appreciate.
Cold-climate buyers consistently flag stiffness as a real installation headache once temperatures drop below freezing, requiring the cable to be pre-warmed indoors before the job. A few contractors also noted that the bubble boot connectors do not seat cleanly in every brand of outdoor wall jack, occasionally requiring light pressure or a different port.
Waterproofing
89%
Buyers in the Pacific Northwest, coastal regions, and other consistently wet climates report this outdoor ethernet cable handling prolonged moisture exposure without any signal degradation or visible jacket damage. In-ground installations in areas with seasonal flooding or high water tables have held up reliably according to multi-season feedback.
The cable itself performs well in water exposure, but the connectors at each end are the vulnerability — several buyers noted that without additional weatherproofing at the jack connection point, moisture can work its way into the RJ45 interface over time. A sealed outdoor enclosure or self-fusing tape at each termination point is essentially mandatory for fully wet environments.
UV Resistance
84%
For buyers running sections of this cable along a fence line, across a roof overhang, or through an exposed outdoor wall entry, the UV-rated LLDPE jacket holds color and flexibility through multiple summers without the surface chalking or cracking seen in non-rated cable jackets. This is especially appreciated in Southern and Southwestern US climates where sun intensity is extreme.
No formal accelerated UV-aging test data is published for this specific product, so long-term projections beyond two to three years of direct exposure are based on user observation rather than lab certification. A small number of users in particularly intense sun climates noticed minor surface dulling after extended above-ground exposure, though functional performance was not reported as affected.
POE Compatibility
87%
Users deploying this direct-burial Cat6 cable to power outdoor security cameras, wireless access points, and POE switches report reliable power delivery without voltage drop issues across the full 150-foot run, which is a meaningful validation of the pure copper construction. Electricians and IT professionals specifically call out the cable as performing correctly across multiple POE standards without derating.
A small subset of buyers using higher-wattage POE+ or POE++ devices noted slightly warmer-than-expected cable temperatures during extended operation at maximum load, though no failures were reported. Users pairing this cable with non-standard or budget POE injectors occasionally saw compatibility quirks unrelated to the cable itself.
Connector Quality
81%
19%
The gold-plated RJ45 connectors arrive factory-crimped with consistent pin alignment, and buyers report satisfying, secure seating in routers, switches, and outdoor wall jacks across dozens of brands. The bubble boots protect the locking tab effectively during repeated plug-and-unplug cycles, which matters for temporary or seasonal installations.
Fit inconsistency in tightly spaced patch panels is the most common connector complaint, with the bubble boot adding enough bulk to make adjacent port access awkward in 1U rack equipment. A small number of buyers also reported one connector feeling slightly looser than the other out of the box, though this was the exception rather than the pattern.
Value for Money
74%
26%
For buyers who specifically need a shielded, direct-burial, pre-terminated run at this length, the pricing is competitive within that narrower product category — you are getting pure copper, FTP shielding, and factory connectors in a single cable without sourcing parts separately. Contractors who factor in saved labor from not field-terminating generally consider it reasonable for the job.
Compared to basic unshielded outdoor Cat6 or CMX-rated cables, the cost per foot is noticeably higher, which makes it hard to justify for simple sheltered runs where the extra shielding and burial rating are unnecessary. DIYers comparing this to bulk spool pricing will find they are paying a meaningful premium for the pre-terminated convenience.
Length Adequacy
71%
29%
For the majority of standard residential installations — house to garage, main building to a backyard shed, or router to an outdoor access point — 150 feet is genuinely sufficient and buyers in that majority express satisfaction with having just enough cable to work with cleanly. The length also avoids the signal attenuation risks that come with very long runs.
A recurring frustration in the feedback involves buyers who measured a straight-line distance, ordered accordingly, and found themselves a few feet short once the actual routed path added distance around obstacles and through wall entries. Users with larger properties, multi-building setups, or runs that require significant detours consistently flag 150 feet as the one spec they wish came in a longer variant.
Flexibility & Manageability
69%
31%
At standard installation temperatures, the cable has enough flex to route around gentle bends and through wall penetrations without needing a fish tape or excessive force. The coil packaging arrives without permanent kinks, and buyers note it lays flat in a trench without constant repositioning.
This is one of the lower-scoring aspects in colder climates — below freezing, the cable becomes notably rigid and difficult to manage, especially for bends tighter than about 12 inches. Even in moderate temperatures, the heavier 23AWG gauge and shielded jacket make this stiffer than thinner outdoor cables, which is a trade-off for the build quality rather than a defect.
Packaging & Delivery
78%
22%
Buyers consistently note the cable arrives well-coiled and with both connectors protected, avoiding the tangled or kinked state that sometimes afflicts pre-terminated cables shipped loosely in plain boxes. The compact coil format makes it easy to transport to a job site and stage near the trench before laying.
A small number of buyers reported minor scuffing on the connector boots from transit friction inside the box, though no functional damage was described. The packaging does not include any installation accessories like cable staples, burial depth markers, or waterproofing supplies, which first-time installers occasionally expected.
Grounding Ease
62%
38%
For IT professionals already familiar with FTP cable installation, grounding this direct-burial Cat6 cable at both ends is a straightforward step that unlocks the full shielding benefit and is handled quickly with standard grounding hardware at each termination point.
For homeowners and general DIYers with no prior experience installing shielded cable, the grounding requirement is an unexpected complication that the product packaging does not clearly explain. Several buyers discovered only after installation — when they experienced intermittent interference — that FTP shielding requires proper grounding to be effective rather than just plugging in like standard unshielded cable.

Suitable for:

The GEARit Cat6 Outdoor Ethernet Cable 150ft is a practical choice for homeowners who are tired of dealing with spotty Wi-Fi at the edges of their property and want a permanent, buried solution connecting a garage, backyard office, or outdoor camera system to their main network. It works equally well for small business owners or IT professionals who need to extend a wired network to an outbuilding or outdoor access point without the added labor and material cost of running conduit. The pre-terminated connectors make it particularly appealing for confident DIYers who can dig a trench but do not want to deal with field-terminating their own cable ends. POE support means a single run can handle both data and power for compatible cameras, switches, or wireless access points — reducing the total number of cables to manage. Anyone in a region with significant rainfall, temperature swings, or intense sun exposure will also find the LLDPE jacket and UV-rated construction genuinely reassuring over a multi-year installation.

Not suitable for:

The GEARit Cat6 Outdoor Ethernet Cable 150ft is not the right fit for buyers who need significantly more than 150 feet in a single unbroken run — if your project spans a large property or connects buildings more than roughly 45 meters apart, you will be better served by a bulk spool that you terminate yourself at the exact length required. Users in extremely cold climates should be aware that the jacket can stiffen substantially in freezing temperatures, making installation in winter conditions more frustrating and increasing the risk of stress on the connectors during routing. This direct-burial Cat6 cable also carries a higher cost per foot than unshielded indoor-rated options, so anyone who simply needs a short run inside a garage or along a sheltered wall is overpaying for weatherproofing they do not need. It is also not ideal for data center or high-density patch environments where the bubble boot connectors may not fit cleanly into tightly spaced patch panels.

Specifications

  • Cable Category: This cable meets Cat6 standards, supporting network environments that require reliable gigabit and multi-gigabit throughput.
  • Conductor Gauge: The conductors are 23AWG, a heavier gauge than the 24AWG found in many budget cables, which helps maintain signal integrity over longer runs.
  • Conductor Material: All eight conductors are made from oxygen-free pure copper, which provides lower resistance and better signal consistency than copper-clad aluminum alternatives.
  • Shielding Type: The cable uses FTP (foil twisted pair) shielding, with a metallic foil layer wrapped around each individual twisted pair to reduce electromagnetic interference.
  • Jacket Material: The outer jacket is made from LLDPE (linear low-density polyethylene), a material rated for direct burial and prolonged UV exposure without cracking or degrading.
  • Cable Length: This cable ships as a single pre-terminated run of exactly 150 feet, suitable for most residential and light commercial outdoor network installations.
  • Max Data Speed: The cable supports data transfer rates up to 10 Gbps, consistent with the Cat6 specification under proper installation conditions.
  • Bandwidth Frequency: Rated to 600 MHz, this cable handles high-frequency signals without significant attenuation across its full 150-foot length.
  • Connector Type: Both ends are factory-terminated with gold-plated RJ45 connectors, which resist oxidation and provide a stable, low-resistance connection point.
  • Connector Boot: Each RJ45 connector is fitted with a flexible PVC bubble boot that shields the locking tab from physical wear and makes disconnection easier in confined spaces.
  • Burial Rating: The LLDPE jacket is rated for direct in-ground burial without the need for conduit, provided it is installed at an appropriate depth per local codes.
  • UV Resistance: The jacket material is formulated to withstand prolonged direct sun exposure, maintaining flexibility and integrity in above-ground outdoor runs as well.
  • Waterproofing: The cable construction is waterproof throughout, making it suitable for wet climates, areas with standing groundwater, and exposed above-ground routing in rainy regions.
  • POE Support: This outdoor ethernet cable is fully compatible with Power over Ethernet (POE) standards, allowing supported devices like IP cameras and wireless access points to receive power through the cable.
  • Cable Weight: The complete 150-foot cable assembly weighs approximately 4.16 pounds, reflecting the heavier gauge copper and shielded jacket construction.
  • Package Dimensions: The cable ships coiled in a package measuring approximately 10.63 x 10.59 x 4.84 inches, sized to protect the pre-terminated connectors during transit.
  • Grounding Requirement: As an FTP-shielded cable, it should be properly grounded at both termination points to achieve the full interference-rejection benefit of the foil shielding.
  • Installation Method: Designed for direct burial, the cable can be laid in a hand-dug or machine-cut trench and backfilled without additional protective conduit in most residential applications.

Related Reviews

GEARit Cat6 Outdoor Ethernet Cable 200ft
GEARit Cat6 Outdoor Ethernet Cable 200ft
80%
88%
Weatherproofing & Burial Rating
84%
Signal Integrity & Performance
86%
Connector Build Quality
91%
Installation Ease
67%
Cold Weather Flexibility
More
GEARit Cat7 Outdoor Ethernet Cable 250ft
GEARit Cat7 Outdoor Ethernet Cable 250ft
80%
91%
Signal Integrity Over Distance
88%
Outdoor Durability & Weather Resistance
86%
Direct Burial Ease
84%
EMI & Interference Shielding
83%
POE (Power over Ethernet) Performance
More
Premiertek FOD-CAT6-1KFT Outdoor Cat6 FTP Cable 1000ft
Premiertek FOD-CAT6-1KFT Outdoor Cat6 FTP Cable 1000ft
73%
83%
Outdoor Durability
81%
Shielding Effectiveness
57%
Conductor Quality (CCA vs Copper)
44%
PoE Compatibility
88%
Spool & Packaging
More
Rapink Cat6 Outdoor Ethernet Cable 150 ft
Rapink Cat6 Outdoor Ethernet Cable 150 ft
86%
91%
Performance and Speed
95%
Durability in Outdoor Conditions
87%
Ease of Installation
88%
Build Quality
85%
Flexibility and Handling
More
JARNHNG Cat6 1000ft Ethernet Cable
JARNHNG Cat6 1000ft Ethernet Cable
85%
92%
Outdoor Durability
88%
Signal Quality and Performance
85%
Ease of Installation
81%
Flexibility for DIY Installations
89%
UV and Weather Resistance
More
trueCABLE Cat5e Outdoor Ethernet Cable 500ft
trueCABLE Cat5e Outdoor Ethernet Cable 500ft
89%
93%
Outdoor Durability
88%
Ease of Installation
91%
Signal Integrity
92%
Value for Money
95%
UV Resistance
More
VIVO 500ft Bulk Cat6 Ethernet Cable
VIVO 500ft Bulk Cat6 Ethernet Cable
86%
93%
Performance for High-Speed Networking
88%
Ease of Installation
85%
Cable Durability
89%
Signal Integrity and Interference Resistance
82%
Build Quality
More
MEIPEK Cat 7 Outdoor Ethernet Cable 500ft
MEIPEK Cat 7 Outdoor Ethernet Cable 500ft
70%
83%
Signal Stability & Speed
88%
Shielding & Interference Rejection
81%
Outdoor & Weather Durability
61%
CCA Conductor Quality
74%
Included RJ45 Connectors
More
MEIPEK Cat 7 Outdoor Ethernet Cable 200ft
MEIPEK Cat 7 Outdoor Ethernet Cable 200ft
72%
83%
Build Quality & Jacket Durability
88%
Shielding Effectiveness
79%
Signal Stability Over Long Runs
86%
Weatherproofing & UV Resistance
81%
Value for Money
More
VOIETOLT Cat 6 Outdoor Ethernet Cable 125ft
VOIETOLT Cat 6 Outdoor Ethernet Cable 125ft
90%
94%
Build Quality & Durability
89%
Ease of Installation
92%
Weather Resistance
91%
Signal Quality
90%
Speed & Performance
More

FAQ

You can bury it directly — that is the whole point of the LLDPE jacket on this cable. No conduit is required for standard residential installations. Just check your local codes for the recommended burial depth; 6 inches is a common minimum for direct-burial ethernet, though 12 inches is safer in areas with regular digging or foot traffic.

Yes, this direct-burial Cat6 cable is fully POE compatible, so it can carry both data and power to supported cameras over a single run. Just confirm your camera and switch or injector are rated for the same POE standard (802.3af, 802.3at, etc.) and you should be good to go.

Most residential installations bury direct-burial ethernet at a minimum of 6 inches, but going to 12 inches gives you much better protection against accidental shovel strikes and frost heave in colder climates. Check your local electrical or building codes as they can vary by region, especially if the cable crosses a driveway or lawn irrigation zone.

For most standard residential lots, yes — 150 feet covers roughly 45 meters, which is enough for the majority of house-to-garage or house-to-shed runs. That said, measure your actual route before ordering, including any detours around landscaping or the house foundation, because a straight-line estimate almost always underestimates real cable length needed.

It works perfectly well above ground too. The UV-resistant jacket handles sun exposure without cracking or fading, so you can run it along a fence, across a roofline, or through an exterior wall without worry. Just secure it properly with appropriate outdoor cable clips or staples to prevent sagging or chafing.

In electrically clean environments, you probably would not notice a difference. But if your cable run passes near outdoor lighting transformers, irrigation controllers, or other sources of electromagnetic noise, the FTP shielding genuinely reduces interference and helps maintain a cleaner signal. It also gives you some extra peace of mind for a permanent buried installation where you cannot easily swap the cable later.

The LLDPE jacket is rated for outdoor use including cold climates, but like most cable jackets it does stiffen noticeably when temperatures drop below freezing. The cable itself will function fine once installed, but routing it around tight corners or through small openings during a cold-weather installation is noticeably harder. If you are planning a winter install, warming the cable in a heated space for an hour before laying it can help significantly.

Technically yes, but you would need a proper Cat6 keystone jack or RJ45 crimp connector and a crimping tool rated for shielded cable, along with experience in cable termination. For most homeowners, it is easier to coil the excess cable in a weatherproof junction box near one end rather than attempting a field termination.

Yes, RJ45 is a universal connector standard, so this cable plugs into routers, switches, patch panels, and wall jacks that accept any RJ45 connection regardless of category rating. Cat5e and Cat7 devices will work with it without any adapters — you just cap out at the performance level of whichever component in your network is the limiting factor.

The bubble boots provide basic mechanical protection, but for any connector that will be exposed to rain or moisture at the point of connection, you should use a weatherproof outdoor enclosure or a sealed junction box at both ends. Self-fusing silicone tape around the connector junction is another practical option for temporary or exposed connections where a full enclosure is not practical.