Tendelux DI10 IR Illuminator for Security Cameras

Tendelux DI10 IR Illuminator for Security Cameras — image 1
Tendelux DI10 IR Illuminator for Security Cameras — image 2
Tendelux DI10 IR Illuminator for Security Cameras — image 3
Tendelux DI10 IR Illuminator for Security Cameras — image 4
Tendelux DI10 IR Illuminator for Security Cameras — image 5
Tendelux DI10 IR Illuminator for Security Cameras — image 6
Tendelux DI10 IR Illuminator for Security Cameras — image 7
81%
19%
88%
Night Vision Performance
84%
Illumination Evenness
86%
Build Quality
91%
Ease of Installation
89%
Angle Adjustability
67%
Compatibility
61%
Covertness
87%
Voltage Drop Resistance
82%
Outdoor Durability
83%
Value for Money
79%
Photocell Auto-Activation
85%
Thermal Management
71%
Cable Management
81%
Warranty and Support
More

Overview

The Tendelux DI10 IR Illuminator for Security Cameras is a compact 4W infrared flood light built to extend the night vision reach of wired CCTV setups without a complicated installation. At its mid-range price, it fills a real gap for homeowners whose cameras struggle after dark. One thing worth knowing upfront: the 850nm wavelength is semi-covert, not invisible — you will see a faint red glow at close range. The unit runs on 24V DC via the included adapter, an update from older 12V supplies that helps prevent brightness loss over longer cable runs. The IP65-rated aluminum housing handles outdoor exposure without issue.

Features & Benefits

The DI10's integrated lens design is one of its standout qualities — it distributes infrared light more evenly across the frame, cutting down on the washed-out center typical of cheaper illuminators. The 90-degree viewing angle aligns neatly with cameras using 2.8mm to 4mm lenses, which covers a wide swath of consumer CCTV hardware. Aiming is refreshingly simple thanks to the 360-degree swivel bracket combined with 90-degree vertical tilt; dialing in the exact coverage angle takes minutes rather than the usual trial and error. The all-aluminum unibody passively dissipates heat, and the built-in photocell kicks the light on automatically at dusk. Effective range sits around 50 to 80 feet under typical conditions.

Best For

This infrared flood light makes the most sense for homeowners who want to boost night coverage on cameras that already exist but fall short after dark. It is also a solid pick if you have been fighting voltage drop on a long cable run — the 24V supply handles that better than older 12V setups. Installers fitting fixed-lens cameras in the 2.8mm–4mm range will find the field-of-view match practically ready out of the box. Those who prefer a less obtrusive solution over bright white floodlights will appreciate the relatively discreet IR output. Setup is plug-and-play, so you do not need an electrician or any technical background to get it running.

User Feedback

Buyers who pick up the DI10 with compatible cameras generally come away pleased — the improvement in nighttime image clarity is the most consistent praise, especially on cameras with feeble built-in IR. The updated bracket earns points too, with many noting how much easier angle adjustment is compared to older designs. On the flip side, a portion of negative reviews trace back to one avoidable issue: users who did not disable their camera's IR cut filter or confirm 850nm compatibility before buying. The close-range red glow also catches some buyers off guard. Outdoor durability feedback is largely positive, though a few users flag the need to weatherproof the external DC connection themselves.

#IR Illuminators
#Accessories
#Security & Surveillance
#Electronics

Pros

  • Night image clarity improves noticeably on cameras with weak or no built-in infrared output.
  • The integrated lens produces even illumination across the frame, reducing hot-spots common in cheaper units.
  • Compact aluminum body is sturdy, lightweight, and runs cool thanks to passive heat dissipation.
  • The 360-degree swivel and 90-degree tilt bracket make precise aiming genuinely quick and frustration-free.
  • IP65 rating holds up well through rain and temperature swings in typical outdoor installations.
  • Built-in photocell handles automatic dusk-to-dawn activation without any extra timer or smart home setup.
  • The 24V power adapter reduces brightness loss over longer cable runs compared to older 12V designs.
  • Setup is straightforward enough for a confident DIYer with no electrical background.
  • 18-month warranty and responsive manufacturer support add a reasonable safety net at this price tier.

Cons

  • The 850nm glow is faintly visible as a red light at close range — it is not a covert solution.
  • Real-world range varies widely depending on camera sensor quality and ambient conditions; 80 feet is not guaranteed.
  • The external DC connector and power supply require weatherproofing by the installer for fully outdoor use.
  • Incompatible with cameras that lack 850nm sensitivity or have a permanently active IR cut filter.
  • Only one viewing angle option at 90 degrees — not ideal for cameras with narrower or wider lenses.
  • No built-in mounting hardware for angled soffits or non-flat surfaces, which can complicate some installs.
  • The photocell override requires physically covering a sensor with tape, which feels like an inelegant workaround.

Ratings

The Tendelux DI10 IR Illuminator for Security Cameras has been scored by our AI rating system after analyzing thousands of verified global purchases, with spam, bot-generated, and incentivized reviews actively filtered out before any score was calculated. The results reflect a genuinely balanced picture — where this infrared flood light earns real praise and where it falls short for certain buyers. Strengths and frustrations are weighted equally so you can make a clear-headed decision.

Night Vision Performance
88%
Users consistently report a meaningful jump in nighttime image quality when pairing the DI10 with cameras that have weak or no built-in IR. Driveways and entry points that previously showed grainy, dark footage come through noticeably cleaner, and the even flood coverage reduces the blown-out center effect common with cheaper alternatives.
Real-world range falls short of the rated ceiling for buyers using older or budget camera sensors — 50 feet is a more reliable expectation in many setups than 80. Users with higher-end cameras get the full benefit; those with entry-level sensors may see only a partial improvement.
Illumination Evenness
84%
The integrated lens design stands out to installers who have dealt with hot-spot-heavy illuminators before. Across a 90-degree field, light distribution is noticeably more consistent, which translates to footage where faces and objects at the frame edges are as readable as those in the center.
At the outer edges of the coverage angle, some users note a mild rolloff in intensity, particularly at longer distances. It is not severe enough to ruin footage, but buyers hoping for perfectly uniform illumination wall-to-wall at 70-plus feet may see slight dimming toward the corners.
Build Quality
86%
The unibody aluminum construction earns consistent praise from users who have previously dealt with plastic housings that cracked, yellowed, or warped after a season outdoors. The unit feels solid and purposeful for its compact size, and the bracket hardware holds its adjusted position without creeping over time.
A small number of users report minor surface oxidation after extended outdoor exposure in coastal or high-humidity environments, suggesting the finish is not fully treated for salt-air conditions. The unit itself remains functional, but the cosmetic appearance can deteriorate faster than expected in harsh climates.
Ease of Installation
91%
The plug-and-play nature of the DI10 is one of its most praised traits among non-technical buyers. Mounting takes under 30 minutes for most users, the included hardware covers the basics, and the swivel bracket means you do not need to get the wall anchor perfectly positioned to aim the light correctly afterward.
The installation instructions assume the power adapter will be housed in a protected box for outdoor use, but this is not explicitly covered in the included manual for first-time buyers. A handful of users discovered the weatherproofing requirement only after moisture reached the DC connector, leading to avoidable failures.
Angle Adjustability
89%
The redesigned bracket draws favorable comparisons to older single-axis designs that required loosening and retightening multiple screws just to shift the aim slightly. The 360-degree swivel combined with 90-degree tilt means most mounting positions — walls, soffits, fence posts — can be dialed in without repositioning the anchor point.
On steeply angled soffits, the 90-degree tilt range can feel limiting, and a few installers note that the bracket does not include a wedge adapter for extreme angles. For standard flat-wall or typical soffit mounts this is rarely a problem, but unconventional mounting surfaces expose the constraint quickly.
Compatibility
67%
33%
For cameras with 2.8mm to 4mm lenses that accept external 850nm IR input, compatibility is close to plug-and-play. Installers working with common Hikvision, Dahua, and Reolink setups report straightforward integration once the IR cut filter is disabled in the camera settings.
Compatibility issues are the most common source of negative reviews, and nearly all trace back to buyers who skipped the camera-side verification steps. Cameras that do not support 850nm, or those where the IR cut filter cannot be turned off, produce zero improvement — and this is not always obvious until after installation.
Covertness
61%
39%
At distances beyond 5 feet, the 850nm glow is not visible to the naked eye under normal ambient lighting, which satisfies most residential perimeter use cases where the light is mounted at typical eave or fence height. For the majority of buyers, it reads as invisible in practice.
Up close, the red LED glow is clearly visible and immediately obvious to anyone who looks directly at the unit. Buyers who specifically need a fully invisible IR source — for retail loss prevention or discreet indoor monitoring — will need a 940nm alternative, as the DI10 does not meet that standard.
Voltage Drop Resistance
87%
Users who previously experienced dimming or flickering on long cable runs with 12V-powered illuminators report that switching to the DI10's 24V supply resolved the issue entirely. Runs of 40 to 60 feet that caused noticeable brightness loss before are no longer a problem with the updated adapter.
The 24V adapter is proprietary in its connector, so users who want to integrate the DI10 into an existing 12V power distribution system need to verify compatibility or run a separate supply. It works on 12V, but the voltage drop benefits disappear on longer runs at the lower input.
Outdoor Durability
82%
18%
The IP65 rating holds up well in practice — most users report no functional issues after months of exposure to rain, morning dew, and seasonal temperature swings. The aluminum body shows no structural degradation, and the photocell remains accurate over time in the vast majority of reported cases.
As noted in build quality, coastal and high-humidity environments accelerate cosmetic wear on the housing finish. A small but consistent group of users also report that the photocell sensitivity drifts slightly after a full year outdoors, causing the unit to activate slightly earlier at dusk or linger slightly past dawn.
Value for Money
83%
At its mid-range price point, the DI10 delivers specifications and build quality that typically cost more from competing brands. For homeowners adding supplemental IR to an existing wired system, the cost-per-foot-of-effective-range calculation comes out favorably compared to most alternatives in the category.
Buyers who need coverage beyond 80 feet, multiple angles, or a higher wattage output will find the value proposition weakens quickly — the next step up in capability requires a meaningful price jump. For light use on a single camera, it is well priced; for ambitious multi-zone installs, the cost adds up.
Photocell Auto-Activation
79%
21%
The automatic dusk-to-dawn activation is reliable and well-calibrated for most outdoor environments, removing the need for any smart home integration or manual scheduling. Users who want a set-and-forget outdoor security light find it behaves predictably night after night.
Disabling the photocell for daytime use requires covering the sensor with black tape, which is a functional but inelegant solution that bothers a portion of buyers. There is no physical switch or app control to toggle between modes, which feels like a missed opportunity at this tier.
Thermal Management
85%
The passive cooling built into the unibody aluminum design keeps operating temperatures well within the rated ceiling even during extended summer nights. Users in warm climates who run the unit continuously from dusk to dawn report no heat-related shutdowns or performance degradation.
In enclosed or poorly ventilated mounting locations — inside a tight soffit cavity, for example — heat buildup is more noticeable and a few users have reported reduced output after prolonged use in those conditions. Mounting with adequate airflow around the body largely prevents this, but it requires some planning.
Cable Management
71%
29%
The included power adapter gives enough cord length for most standard mounting positions relative to an outdoor outlet, and the DC connector is simple to route along a wall channel or conduit. Most users manage a clean-looking install without needing extension cables.
For longer runs or installations where the outlet is far from the mounting point, users need to source their own DC extension cable separately, and not all third-party cables maintain adequate gauge to preserve the voltage advantages of the 24V supply. The box gives no guidance on cable gauge requirements.
Warranty and Support
81%
19%
The 18-month warranty is above average for the category, and Tendelux's direct manufacturer support receives positive mentions from buyers who needed help with setup questions or replacement parts. Response times are generally described as prompt relative to what buyers expect from a smaller brand.
The warranty does not cover damage resulting from improper outdoor installation — specifically, unprotected DC connectors or exposed power supplies — which is a scenario that catches a non-trivial number of first-time buyers. The coverage period also falls short of the 2-year standard offered by a few competing brands.

Suitable for:

The Tendelux DI10 IR Illuminator for Security Cameras is a strong fit for homeowners and small-scale installers who need to push their existing wired cameras further into the dark without replacing the cameras themselves. If your current setup covers a driveway, side entrance, or backyard perimeter up to about 80 feet, this infrared flood light slots in cleanly and delivers a genuine improvement in nighttime image quality. It works especially well alongside fixed-lens cameras in the 2.8mm to 4mm range, where the 90-degree coverage angle lines up naturally with the camera's field of view. Anyone who has previously fought brightness loss on a long cable run will appreciate the 24V power supply, which handles voltage drop far better than older 12V setups. The plug-and-play installation also makes it accessible to people who are comfortable mounting a camera but have no interest in electrical work.

Not suitable for:

The Tendelux DI10 IR Illuminator for Security Cameras is not the right tool for every situation, and a few specific scenarios will leave buyers frustrated. If your camera does not support 850nm infrared light, or if it has an IR cut filter that cannot be disabled, this infrared flood light will produce little to no usable improvement — that compatibility check is non-negotiable before purchasing. Buyers expecting a fully covert solution should also reconsider: the 850nm output produces a faint but visible red glow at close range, which rules it out for applications where the light source must be completely invisible. The 50 to 80-foot effective range is a rough average that depends heavily on camera sensor sensitivity and environment, so anyone needing reliable coverage beyond that distance should look at higher-wattage options. Finally, the external power supply is not weatherproof on its own, which adds a step for fully outdoor installs that some buyers overlook.

Specifications

  • Power Consumption: The unit draws 4W during normal operation, making it an energy-efficient option for continuous overnight use.
  • IR Wavelength: Infrared output is at 850nm, a semi-covert wavelength that produces a faint red glow visible at close range but undetectable beyond roughly 5 feet.
  • Effective Range: Illumination range is rated at 50 to 80 feet under typical conditions, though actual results vary based on camera sensor sensitivity and environmental factors.
  • Viewing Angle: The integrated lens produces a 90-degree flood angle, best matched to cameras fitted with 2.8mm, 3.6mm, or 4mm lenses.
  • Input Voltage: The unit accepts both 12V and 24V DC input; the included power adapter outputs 24V DC at 1A to minimize brightness loss over extended cable runs.
  • Power Adapter: A 110–240V AC to 24V DC 1A corded adapter is included in the box, supporting standard residential outlets worldwide.
  • Housing Material: The lamp body is constructed from unibody aluminum, which provides structural rigidity and acts as a passive heat sink during operation.
  • IP Rating: Rated IP65, meaning the housing is fully dust-tight and protected against direct water jets, suitable for exposed outdoor mounting.
  • Dimensions: The lamp unit measures 2.5 x 2.5 x 2.7 inches, making it notably compact relative to comparable wattage illuminators.
  • Item Weight: The lamp weighs 0.8 pounds, light enough for easy single-person installation on walls, soffits, or fence posts.
  • Mounting System: Comes with a 360-degree horizontal swivel and 90-degree vertical tilt bracket machined from aluminum for precise, rust-resistant aiming adjustments.
  • Photocell: An integrated photocell automatically activates the light at dusk and deactivates it at dawn; it can be disabled by covering it with opaque tape for daytime operation.
  • Max Operating Temp: The unit is rated to operate in ambient temperatures up to 55 degrees Celsius, covering most outdoor climates without thermal shutdown concerns.
  • Operating Wavelength Type: 850nm is classified as near-infrared and is compatible with most standard CCTV and IP cameras that support external IR input with the IR cut filter disabled.
  • Warranty: Tendelux provides an 18-month warranty on the DI10, backed by direct manufacturer support for the product lifetime.
  • Installation Type: Wall-mount installation using included screws; no hardwiring required since the unit runs off the included corded DC adapter.
  • Included Contents: The package contains the lamp unit, the 360-degree adjustable mounting bracket, a 24V DC power adapter, installation screws, and a printed user manual.

Related Reviews

eufy Security E340 Floodlight Camera
eufy Security E340 Floodlight Camera
78%
88%
Image Clarity & Resolution
91%
Night Vision & Floodlight Performance
84%
360° PTZ Coverage
79%
AI Detection Accuracy
58%
Installation Experience
More
ZEEPORTE Snap 30T Solar Pan-Tilt Security Camera
ZEEPORTE Snap 30T Solar Pan-Tilt Security Camera
74%
83%
Image Clarity
79%
Night Vision
61%
Solar Charging Reliability
88%
Pan and Tilt Coverage
67%
App Experience
More
SANNCE DVR-100 1TB 8CH Security Camera System
SANNCE DVR-100 1TB 8CH Security Camera System
74%
83%
Daytime Image Quality
67%
Night Vision Performance
79%
Build Quality & Weatherproofing
74%
DVR Reliability & Performance
81%
Storage & Recording
More
WESECUU 4CAM 4K POE Security Camera System
WESECUU 4CAM 4K POE Security Camera System
71%
83%
Image Clarity
78%
Night Vision Performance
71%
AI Detection Accuracy
54%
Mobile App Experience
76%
Setup & Installation
More
3-Link Battery Camera TB1 S Solar Security Camera
3-Link Battery Camera TB1 S Solar Security Camera
84%
91%
Setup & Installation
89%
Motion Detection Reliability
88%
Solar Charging Efficiency
83%
Night Vision Performance
85%
Weather Resistance
More
Hiseeu 12-Camera 3TB Wireless Security System
Hiseeu 12-Camera 3TB Wireless Security System
70%
83%
Value for Money
76%
Image Quality
71%
Night Vision
78%
Setup & Installation
58%
App Experience
More
SMONET 8-Channel Wireless Security Camera System with 4pcs 1080P Cameras and 3TB HDD
SMONET 8-Channel Wireless Security Camera System with 4pcs 1080P Cameras and 3TB HDD
85%
91%
Value for Money
96%
Ease of Setup
87%
Video Quality
90%
Night Vision Performance
85%
App Usability
More
ZOSI 2K NVR Security Camera System 1TB
ZOSI 2K NVR Security Camera System 1TB
76%
83%
Image Quality
79%
Night Vision Performance
76%
AI Detection Accuracy
77%
Setup & Installation
67%
App Experience
More
ONWOTE PKA801608S 16-Channel 4K PoE Security Camera System
ONWOTE PKA801608S 16-Channel 4K PoE Security Camera System
78%
91%
Image Clarity
83%
Night Vision
74%
AI Detection Accuracy
67%
Ease of Installation
69%
Audio Recording
More
Hiseeu WK-8HB615-CT 8-Camera 5MP NVR Security System
Hiseeu WK-8HB615-CT 8-Camera 5MP NVR Security System
76%
78%
Image Quality
83%
Night Vision
91%
Local Storage Value
71%
AI Human Detection
58%
Ease of Installation
More

FAQ

It depends on two things: your camera needs to be sensitive to 850nm infrared light, and it must allow you to disable the IR cut filter in the settings. Most standard CCTV and IP cameras meet both conditions, but it is worth confirming in your camera's manual before buying. If the IR cut filter stays on, it will block the external infrared light and you will see no improvement at night.

Not quite. The 850nm wavelength is semi-covert, which means it gives off a faint red glow from the LEDs that is visible if you are standing within about 5 feet of the unit. From further away, the glow is not noticeable to the naked eye. If you need a fully invisible setup, you would want a 940nm illuminator instead.

A 60-foot driveway should fall comfortably within range under normal conditions. The rated range of 50 to 80 feet is a practical estimate, but keep in mind that the upper end assumes a camera with a reasonably sensitive sensor and a clear line of sight. Walls, dense foliage, or a less sensitive camera can reduce effective reach, so managing expectations beyond 70 feet is wise.

No. The Tendelux DI10 IR Illuminator for Security Cameras runs off an included AC-to-DC power adapter that plugs into a standard wall outlet. As long as you have an outdoor outlet or a weatherproof junction box nearby, installation is a straightforward mount-and-plug process that most homeowners can handle in under 30 minutes.

Yes, the IP65 aluminum housing is built for permanent outdoor exposure. It handles rain, dust, and temperature swings without issue. The one thing you do need to handle yourself is weatherproofing the DC connector and keeping the power adapter in a protected or weatherproof enclosure, since the adapter itself is not rated for direct outdoor exposure.

The 90-degree flood angle pairs most naturally with cameras using 2.8mm, 3.6mm, or 4mm fixed lenses, which are among the most common in consumer and prosumer CCTV systems. If your camera has a significantly narrower lens, like 6mm or 8mm, the illuminator's spread will be wider than the camera's field of view, and some of the light will go to waste.

Higher voltage handles voltage drop better over long cable runs. With a 12V supply, running the cable 30 or 40 feet from the outlet to the mounting point could cause a noticeable drop in brightness. The 24V adapter largely eliminates that problem. The lamp itself accepts both 12V and 24V input, so if you already have a 12V supply on a short run, it will still work.

It turns on automatically. There is a built-in photocell that senses ambient light levels and switches the unit on at dusk and off at dawn. If you want it running during the day — say, in a dim indoor space or a garage — you can cover the photocell sensor with a small piece of black tape and it will stay on continuously.

Almost certainly yes. The included 24V adapter is specifically designed to address that problem. Voltage drop is proportional to distance and current draw, and stepping up to 24V gives the system significantly more headroom before that drop starts affecting brightness. Most users who upgrade from older 12V units on long runs report a clear improvement.

The 90-degree tilt bracket gives you a fair amount of adjustment range, but mounting on a steep angled soffit might push you toward the edge of that range. In most typical soffit installs the bracket handles it fine. If you are dealing with a particularly sharp pitch, you may need a small wedge mount or angled adapter to get the light aimed precisely where you need it.

Where to Buy

eBay
Tendelux DI10 IR Illuminator for Security Cameras
In stock $37.49
Buy Now
Tendelux
Tendelux DI10 IR Illuminator for Security Cameras
In stock $35.99
Buy Now